S9S08DZ96F2VLF NXPの

S9S08DZ96F2VLF NXPの
S9S08DZ96F2VLF NXPの
S9S08DZ96F2VLF NXPの
S9S08DZ96F2VLF NXPの

S9S08DZ96F2VLF NXPの

利用できる
S9S08DZ96F2VLF  NXP
 

8ビットHCS08中央処理装置(CPU)
• 40-MHz HCS08 CPU (20-MHz bus)
• HC08 instruction set with added BGND instruction
• Support for up to 32 interrupt/reset sources

オンチップメモリ
• FLASH read/program/erase over full operating voltage and temperature
• EEPROM in-circuit programmable memory; 8-byte single-page or 4-byte dual-page erase sector; Program and Erase while executing FLASH; Erase abort
• Random-access memory (RAM)

省電力モード
• Two very low power stop modes
• Reduced power wait mode
• Very low power real time interrupt for use in run, wait, and stop

クロック ソース オプション
• Oscillator (XOSC) — Loop-control Pierce oscillator; Crystal or ceramic resonator range of 31.25 kHz to 38.4 kHz or 1 MHz to 16 MHz
• Multi-purpose Clock Generator (MCG) — PLL and FLL modes; reference clock with nonvolatile trim (0.2% resolution, 1.5% tolerance over temperature with internal temperature compensation); External reference with oscillator/resonator options

システム保護
• Watchdog computer operating properly (COP) reset with option to run from backup dedicated 1-kHz internal clock source or bus clock; with optional windowed operation
• Low-voltage detection with reset or interrupt; selectable trip points
• Illegal opcode detection with reset
• Illegal address detection with reset
• FLASH and EEPROM block protect
• Loss-of-lock protection

開発支援
• Single-wire background debug interface
• On-chip, in-circuit emulation (ICE) with real-time bus capture

入力/出力
• Up to 87 general-purpose input/output (I/O) pins and 1 input-only pin
• Up to 32 interrupt pins with selectable polarity on each pin
• Hysteresis and configurable pull device on all input pins.
• Configurable slew rate and drive strength on all output pins.

パッケージオプション
• 100-pin low-profile quad flat-pack(LQFP) — 14x14 mm
• 64-pin low-profile quad flat-pack (LQFP) — 10x10 mm
• 48-pin low-profile quad flat-pack (LQFP) — 7x7 mm

Tips on getting accurate quotes from suppliers. Please include the following in your inquiry:
1. 個人情報またはビジネス情報
2.製品リクエストを非常に詳細に提供します
3. 照会 for MOQ, Unit Price, etc




Please make sure your contact information is correct. Your message will be sent directly to the recipient(s) and will not be publicly displayed. We will never distribute or sell your personal information to third parties without your express permission.